EHX - Holy Grail [schematic]
Information
- Posts: 49
- Joined: 04 Sep 2007, 13:56
- Contact:
I was wondering if anyone had anything on this particular pedal?
Thanks for any info.
Thanks for any info.
Information
- Posts: 49
- Joined: 04 Sep 2007, 13:56
- Contact:
Information
- Posts: 22
- Joined: 24 Jul 2008, 19:36
hey, i got a holy grail with a fried resistor and i need the schematic! can anyone help?
- Attachments
-
- aaholygrailrbsch.pdf
- EHX - Holy Grail schematic
- (25.67 KiB) Downloaded 469 times
- analogguru
- Old Solderhand
Information
Please don´t post copyrighted schematics. They will be removed like in this case.mensur wrote:Here you go!!!.
Feel free to send it your friends instead by e-mail on request.
analogguru
There´s a sucker born every minute - and too many of them end up in the bootweak pedal biz.
- BJF
- Resistor Ronker
Hi,
If that's the 47R resistor that sits just before the regulator you can replace that with an 1N4002 diode.
The supplies these come with leave a little too high voltage and these are better driven by a stabilized 9V at least 200mA supply.
Have fun
BJ
If that's the 47R resistor that sits just before the regulator you can replace that with an 1N4002 diode.
The supplies these come with leave a little too high voltage and these are better driven by a stabilized 9V at least 200mA supply.
Have fun
BJ
- Barcode
- Diode Debunker
i find that in some units i have worked on or owned, that at least 500mA was required (which is the rating of the stock adapter) to keep the reverb clean.BJF wrote:Hi,
If that's the 47R resistor that sits just before the regulator you can replace that with an 1N4002 diode.
The supplies these come with leave a little too high voltage and these are better driven by a stabilized 9V at least 200mA supply.
Have fun
BJ