Page 4 of 4
Re: Bogner - Ecstasy Red
Posted: 10 May 2018, 20:53
by Intripped
thanks Stephanovitch!
...for future visibility i've uploaded the image here on the forum, hope you don't mind
Re: Bogner - Ecstasy Red
Posted: 23 Jun 2019, 14:52
by Lithium_Grim
Can anyone tell me what the structure is switching in all 3 positions? I guess it is a DP3T On-Off-On of sorts. and I can see tha in 1 position a 680p is on 1 side engaded and a 2200p on the other side. But what other components are involved?
Re: Bogner - Ecstasy Red
Posted: 29 Nov 2020, 19:16
by snakepit86
Hi everyone
This is the best i can do with the secret part layout
There is some missing parts, all transistors are the BS170, i guess the 680nf and 4,7uf caps go with some source resistors
If anyone did some further research please post
Cheers
Re: Bogner - Ecstasy Red
Posted: 08 Apr 2021, 09:22
by POTL
It’s really bs170?
Where j201 from picture?
Re: Bogner - Ecstasy Red
Posted: 25 Nov 2021, 12:59
by hendrox
The J201 is the booster side on the front end, The schematic in the goop is nearly identical to Box of Rock. But it runs with 27 volts if I remember correctly. I will try to build a box of rock without tonestack and add the TS traced up here to check the results. The Box of Rock's gain section ( 1st stage source pot) will be 1k or lower value with a bypass to see if it works.
Re: Bogner - Ecstasy Red
Posted: 29 Nov 2021, 06:26
by Stephanovitch
Re: Bogner - Ecstasy Red
Posted: 06 Mar 2022, 16:08
by snakepit86
i wasnt able to open the .lay6 file, wich program should i use?
Re: Bogner - Ecstasy Red
Posted: 06 Mar 2022, 16:42
by Manfred
[/quote]i wasnt able to open the .lay6 file, wich program should i use?[/quote]
You can only open this file with SprintLayout 6.0 or with the free viewer from Abacom.
https://www.electronic-software-shop.co ... anguage=en
Mouse click on the field "Viewer for Sprint layout"
Re: Bogner - Ecstasy Red
Posted: 20 Aug 2023, 04:00
by orcl2
Hi everyone, do we have the schematic for the rest of the pedal.
THX
Re: Bogner - Ecstasy Red
Posted: 26 Aug 2023, 17:40
by snakepit86
it seems not, i've been waiting