JHS Tidewater

General documentation, gut shot, schematic links, ongoing circuit tracing, deep thoughts ... all about boutique stompboxes.
Post Reply
User avatar
Crowella
Degoop Doctor
Information
Posts: 36
Joined: 29 Jul 2009, 08:23
Location: Central Coast, NSW, Aus
Has thanked: 9 times
Been thanked: 16 times
Contact:

Post by Crowella »

This is missing many values, if you have a method to suggest measuring SMD caps without being destructive, I'd massively appreciate it

Um, yeah, long story short, my bandmate bought one and I had a sneaking suspicion it was a tweaked EA Tremolo. Yep, it's looking like it. Couldn't do more than just trace it, so I haven't really measured anything I can't visually.

Has an internal dip switch combo which oddly I didn't play around with when I had it open.

Thought I'd put this up just cause I can.


Image
Attachments
JHS Tidewater
JHS Tidewater

User avatar
modman
a d m i n
Information
Posts: 4890
Joined: 19 Jun 2007, 16:57
Has thanked: 4394 times
Been thanked: 2131 times

Post by modman »

ka-g-020119-tu01-1.jpg
ka-g-020119-tu01-3.jpg
Screen Shot 2020-03-09 at 16.35.07.png
Screen Shot 2020-03-09 at 16.35.07.png (149.83 KiB) Viewed 1022 times
where have I seen that type of datecode before? :hmmm:

Screen Shot 2020-03-09 at 16.35.21.png
Screen Shot 2020-03-09 at 16.35.21.png (54.49 KiB) Viewed 1022 times
Headquarters location.. doesn't say "made in..."
Please, support freestompboxes.org on Patreon for just 1 pcb per year! Or donate directly through PayPal

User avatar
Crowella
Degoop Doctor
Information
Posts: 36
Joined: 29 Jul 2009, 08:23
Location: Central Coast, NSW, Aus
Has thanked: 9 times
Been thanked: 16 times
Contact:

Post by Crowella »

Interesting, I just noticed that you pictured a Rev 1.2 and I have a 1.3. Already noticed there's no P1 designation on my board. (actually, what is that for?) :scratch:

The revision I have also doesn't have that extra obnoxious LED. :lol:



Image

Post Reply