Tayda Electronics

Looking for a particular component or hardware part and you just cannot find it? Got comoonents surplus and want to get rid of it? Post it all here... No sales of working pedals, put these in the 'Seen for sale' section please.

Re: Tayda Electronics

Postby bigmufffuzzwizz » 07 Oct 2011, 19:51

I saw those Davies knobs there too! They look much better than their normal knobs but I've seen people make those work..
They also stocked a whole lot of box film caps at a nice price. I'm curious to see the quality of the 1/4'' jacks they just added.
Magic Pedals Home of The Shrine Fuzz!
User avatar
bigmufffuzzwizz
Breadboard Brother
 
Posts: 132
Joined: 04 Mar 2011, 22:42
Has thanked: 3 times
Have thanks: 2 times

Re: Tayda Electronics

Postby quaternotetriplet » 07 Feb 2012, 12:10

anyone tried their jacks? seems solid in the pics. :applause:
quaternotetriplet
Resistor Ronker
 
Posts: 377
Joined: 19 Nov 2008, 14:37
Has thanked: 10 times
Have thanks: 4 times

Re: Tayda Electronics

Postby Seiche » 07 Feb 2012, 12:34

quaternotetriplet wrote:anyone tried their jacks? seems solid in the pics. :applause:

yeah they're alright. there might be better for the price though.
User avatar
Seiche
Old Solderhand
 
Posts: 2561
Joined: 01 Nov 2010, 01:16
Location: Germany
Has thanked: 266 times
Have thanks: 216 times

Re: Tayda Electronics

Postby quaternotetriplet » 07 Feb 2012, 14:29

Seiche wrote:
quaternotetriplet wrote:anyone tried their jacks? seems solid in the pics. :applause:

yeah they're alright. there might be better for the price though.

are they most similar to those switchcraft? i mean their nuts are solid. the jacks available here arent that solid.. after a year or so they tend to loose sometimes.
quaternotetriplet
Resistor Ronker
 
Posts: 377
Joined: 19 Nov 2008, 14:37
Has thanked: 10 times
Have thanks: 4 times

Re: Tayda Electronics

Postby Seiche » 07 Feb 2012, 21:25

quaternotetriplet wrote:
Seiche wrote:
quaternotetriplet wrote:anyone tried their jacks? seems solid in the pics. :applause:

yeah they're alright. there might be better for the price though.

are they most similar to those switchcraft? i mean their nuts are solid. the jacks available here arent that solid.. after a year or so they tend to loose sometimes.

i can't tell, I used them for a build about 1-2 weeks ago. time will tell.

i prefer those though, if that's an option. they're cheaper too.
User avatar
Seiche
Old Solderhand
 
Posts: 2561
Joined: 01 Nov 2010, 01:16
Location: Germany
Has thanked: 266 times
Have thanks: 216 times

Re: Tayda Electronics

Postby culturejam » 07 Feb 2012, 22:37

I like Tayda for most things.

But man, I got some bad 5v regulators from them. Bought about 30, and every damn one of them was wonky. And I kept thinking I was screwing up my 2399 builds. :slap:
User avatar
culturejam
Old Solderhand
 
Posts: 4278
Joined: 24 Feb 2008, 06:59
Has thanked: 477 times
Have thanks: 594 times

Re: Tayda Electronics

Postby quaternotetriplet » 08 Feb 2012, 01:37

Seiche wrote:
quaternotetriplet wrote:
Seiche wrote:
quaternotetriplet wrote:anyone tried their jacks? seems solid in the pics. :applause:

yeah they're alright. there might be better for the price though.

are they most similar to those switchcraft? i mean their nuts are solid. the jacks available here arent that solid.. after a year or so they tend to loose sometimes.

i can't tell, I used them for a build about 1-2 weeks ago. time will tell.

i prefer those though, if that's an option. they're cheaper too.
neutrik ones? yeah their tough man.
quaternotetriplet
Resistor Ronker
 
Posts: 377
Joined: 19 Nov 2008, 14:37
Has thanked: 10 times
Have thanks: 4 times

Re: Tayda Electronics

Postby Seiche » 08 Feb 2012, 11:38

quaternotetriplet wrote:neutrik ones? yeah their tough man.

I don't know if they're neutrik (originally), they look like the more expensive switchcraft and work like a charm.
User avatar
Seiche
Old Solderhand
 
Posts: 2561
Joined: 01 Nov 2010, 01:16
Location: Germany
Has thanked: 266 times
Have thanks: 216 times

Re: Tayda Electronics

Postby marmaliser » 08 Feb 2012, 12:49

culturejam wrote:But man, I got some bad 5v regulators from them. Bought about 30, and every damn one of them was wonky. And I kept thinking I was screwing up my 2399 builds. :slap:

I have a ones from tayda and no really sucessfull PT2399 builds , what was the problem? Dodgy voltages ?
marmaliser
Breadboard Brother
 
Posts: 138
Joined: 21 Jun 2010, 19:14
Has thanked: 56 times
Have thanks: 48 times

Re: Tayda Electronics

Postby Seiche » 08 Feb 2012, 13:44

marmaliser wrote:
culturejam wrote:But man, I got some bad 5v regulators from them. Bought about 30, and every damn one of them was wonky. And I kept thinking I was screwing up my 2399 builds. :slap:

I have a ones from tayda and no really sucessfull PT2399 builds , what was the problem? Dodgy voltages ?

check the voltage that's coming out of the regulator with a DMM. if it's above 5v they are bad.
mine work.
User avatar
Seiche
Old Solderhand
 
Posts: 2561
Joined: 01 Nov 2010, 01:16
Location: Germany
Has thanked: 266 times
Have thanks: 216 times

Re: Tayda Electronics

Postby skylark44 » 09 Feb 2012, 08:04

I've ordered parts from them before...and I'm placing a BIG order, from them in a day or so...you can't beat the quality/prices to anyplace that I've tried (so far :thumbsup). :mrgreen:
User avatar
skylark44
Solder Soldier
 
Posts: 234
Joined: 09 Sep 2010, 02:41
Has thanked: 14 times
Have thanks: 5 times

Re: Tayda Electronics

Postby roseblood11 » 09 Feb 2012, 10:44

I had a problem with my last delivery from Tayda:
The bill wasn't placed at the outside of the parcel.
Because of that, I had to print out the complete order and the paypal bill, had to drive to the customs authorities (at the other end of the town...), and wait there for 90 minutes until I got the parcel.
roseblood11
Tube Twister
 
Posts: 1855
Joined: 23 Aug 2008, 15:21
Has thanked: 355 times
Have thanks: 325 times

Re: Tayda Electronics

Postby mojah63 » 09 Feb 2012, 12:36

I liked the jacks too... I should have ordered more :slap:

My order was filled and shipped a lot faster than futerlec
and the 1/4 jacks are much better quality. I also bought a
few of those 5v reg but I haven't used any yet. I found a
few old ones from Mouser I had in the wrong bin.
User avatar
mojah63
Breadboard Brother
 
Posts: 140
Joined: 11 Apr 2008, 21:08
Location: East Coast US
Has thanked: 30 times
Have thanks: 18 times

Re: Tayda Electronics

Postby quaternotetriplet » 10 Feb 2012, 02:46

mojah63 wrote:I liked the jacks too... I should have ordered more :slap:

My order was filled and shipped a lot faster than futerlec
and the 1/4 jacks are much better quality. I also bought a
few of those 5v reg but I haven't used any yet. I found a
few old ones from Mouser I had in the wrong bin.

Ok, i think i need to order jacks from them.. im tired of loose jacks.. :applause:
quaternotetriplet
Resistor Ronker
 
Posts: 377
Joined: 19 Nov 2008, 14:37
Has thanked: 10 times
Have thanks: 4 times

Re: Tayda Electronics

Postby Mugshot » 10 Feb 2012, 05:49

quaternotetriplet wrote:
mojah63 wrote:I liked the jacks too... I should have ordered more :slap:

My order was filled and shipped a lot faster than futerlec
and the 1/4 jacks are much better quality. I also bought a
few of those 5v reg but I haven't used any yet. I found a
few old ones from Mouser I had in the wrong bin.

Ok, i think i need to order jacks from them.. im tired of loose jacks.. :applause:


ive got your jacks ready *poke* :hug:
signatures are for the weak.

FiveseveN wrote:
considering the low quality of the transistors and caps

Are Asian electrons inferior to American electrons?
User avatar
Mugshot
Breadboard Brother
 
Posts: 97
Joined: 18 Mar 2009, 08:17
Has thanked: 1 time
Have thanks: 1 time

Re: Tayda Electronics

Postby culturejam » 10 Feb 2012, 06:03

marmaliser wrote:I have a ones from tayda and no really sucessfull PT2399 builds , what was the problem? Dodgy voltages ?

They put out 5v when under no load. But when you hook it up to the 2399, the voltage drops to about 3v. I think the ones I have (or had) somehow couldn't provide the current demand at 5v.

As soon as I swapped out to the regulators I got from Mammoth, the circuit fires right up.

And yes, I checked and double-checked the pinout on the Tayda regulators. :thumbsup

For this message the author culturejam has received thanks:
marmaliser (10 Feb 2012, 10:32)
User avatar
culturejam
Old Solderhand
 
Posts: 4278
Joined: 24 Feb 2008, 06:59
Has thanked: 477 times
Have thanks: 594 times

Re: Tayda Electronics

Postby quaternotetriplet » 10 Feb 2012, 09:50

Mugshot wrote:
quaternotetriplet wrote:
mojah63 wrote:I liked the jacks too... I should have ordered more :slap:

My order was filled and shipped a lot faster than futerlec
and the 1/4 jacks are much better quality. I also bought a
few of those 5v reg but I haven't used any yet. I found a
few old ones from Mouser I had in the wrong bin.

Ok, i think i need to order jacks from them.. im tired of loose jacks.. :applause:


ive got your jacks ready *poke* :hug:
ill try which ever performs better man!!! :hug:
quaternotetriplet
Resistor Ronker
 
Posts: 377
Joined: 19 Nov 2008, 14:37
Has thanked: 10 times
Have thanks: 4 times

Re: Tayda Electronics

Postby Seiche » 13 Feb 2012, 18:27

i wish they had v3205 and NE570s that i need for the dirtbag delay. Sourcing them is kind of a bitch. Banzai has them, but they want 6 € shipping for 3 ICs :evil:
anyone know any other sources in europe?
User avatar
Seiche
Old Solderhand
 
Posts: 2561
Joined: 01 Nov 2010, 01:16
Location: Germany
Has thanked: 266 times
Have thanks: 216 times

Re: Tayda Electronics

Postby GermanCdn » 15 Feb 2012, 14:00

Not much luck with the V3205 in Europe, I bought mine for my Dirtbag from Banzai (with a much bigger order, so shipping wasn't so bad). I picked up a NE570 off of ebay for the same build for a couple of bucks shipped (haven't installed it yet, but they aren't fakes, seller is allpartspipe2008, and I have bought from them before with good success), but with all the bogus 3005/3205 out there, wasn't going to risk it
GermanCdn
 
Posts: 2
Joined: 06 Jan 2012, 11:08
Has thanked: 0 time
Have thanks: 0 time

Re: Tayda Electronics

Postby Seiche » 15 Feb 2012, 14:32

GermanCdn wrote:Not much luck with the V3205 in Europe, I bought mine for my Dirtbag from Banzai (with a much bigger order, so shipping wasn't so bad). I picked up a NE570 off of ebay for the same build for a couple of bucks shipped (haven't installed it yet, but they aren't fakes, seller is allpartspipe2008, and I have bought from them before with good success), but with all the bogus 3005/3205 out there, wasn't going to risk it

funny, i just bought 2 NE570s from allpartspipe2008 yesterday :D

i guess i'll just go to the banzai warehouse and pick it up myself or order something else from them.
User avatar
Seiche
Old Solderhand
 
Posts: 2561
Joined: 01 Nov 2010, 01:16
Location: Germany
Has thanked: 266 times
Have thanks: 216 times

PreviousNext

Return to Parts Sourcing & Trading

Who is online

Users browsing this forum: No registered users and 3 guests